山西某污水處理廠提標擴容改造工程設計 伍波, 周軍寶, 葉昌明* （深圳市清泉水業股份有限公司，深圳518116）

伍波, 周軍寶, 葉昌明*

（深圳市清泉水業股份有限公司，深圳518116）

摘要：山西某污水處理廠通過將原SBR+BAF+砂濾池工藝改造為ABM短時泥膜法[即AAO（活性污泥法）、BAF（曝氣生物濾池）和MDF（多功能深床濾池）組合工藝]污水處理工藝后，其設計規模從5000m³/d增加至10000m³/d，出水水質主要指標由《城鎮污水廠污染物排放標準》（GB18918-2002）一級B提高至地表Ⅴ類。利用原構筑物進行改造，同時新建模塊化標準件廠房以增加污水處理廠產水量，縮短了施工周期。詳細介紹了該工程概況、原工藝存在的問題、改造思路以及設計總結。

關鍵詞：提標擴容改造；ABM短時泥膜法；BAF模塊；MDF模塊；地表Ⅴ類

中圖分類號：TU992文獻標識碼：C   

Design of Upgrading Reconstruction and Capacity Expansion of a Wastewater Treatment Plant in Shanxi

WU Bo, ZHOU Jun-bao, YE Chang-ming

(Shenzhen Qingquan Water Industry Co. Ltd., Shenzhen 518116, China)

Abstract: A wastewater treatment plant in Shanxi had transformed the original SBR+BAF+ sand filter process into ABM short-time sludge membrane method (that were AAO (activated sludge process), BAF (aeration biological filter) and MDF (multi-function deep bed filter) combined process). The design capacity of the object could be added from 5000m³/d to 10000m³/d, and the main index of effluent quality could be increasedfrom the first level B criteria specified in the Discharge Standard of Pollutants for Municipal Wastewater treatment Plant (GB 18918-2002) to the specified water standard level ⅴ. Rebuilt the original structure and built a modular factory building at the same time, that to increase the water output of the sewage treatment plant and short the construction period. The general situation of the project, the problems existing in the original technology, the reform ideas and the design summary weredetailedlyintroduced.

Key words: upgrading reconstruction and capacity expansion; ABM short-term sludge membrane method; BAF module; MDF module; the specified water standard level ⅴ